3/4” BSPP Threaded
Showing all 9 results
-
Return LineAFR Tank Top Return Line Filters
(1/2″, 3/4″, 1″, 1-1/4″ BSPP, 2 Hole Flange)Tank Top Return Line Filters
- AFR Series filters are designed for tank top mounting and can be applied for either suction or return line filtration.
- The body and cover are cast from aluminium alloy.
- BSPP Threads
MANUFACTURED BY
(0 reviews) -
Return LineOMTF Tank Top Return Line Filters
(1/2″, 3/4″, 1″, 1-1/4″, 2″ BSPP, 2,3,4 Hole Flange)Return Line Filters
OMTF Series filters are designed for return line filtration, tank top mounted with a semi-immersed body. The head and cover are manufactured from tempered aluminium while the canister is of galvanised steel.
MANUFACTURED BY
(0 reviews) -
Pressure LineHPM High Pressure Filters (1/2″, 3/4″ BSPP Threaded)
High Pressure Filters
Manufactured from a cast iron head and steel bowl this range of high pressure filters are used in pressure lines to provide system protection from fluid contamination
MANUFACTURED BY
(0 reviews) -
Suction LineSF Suction Strainers
(3/8”, 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3” BSPP Threaded)Suction Strainers
SF series suction strainers are designed for fully immersed tank mounting. Elements are constructed of a cleanable metal mesh.
MANUFACTURED BY
(0 reviews) -
Suction LineOMT Suction Strainers
(3/4” BSPP Threaded)Suction Strainers
This suction strainer has been designed to be inserted through and screwed into a 1” BSP socket welded into the tank wall. The assembly leaves a 3/4” BSP female thread as the pump suction outlet from the reservoir.
The 90/110 micron wire mesh element protects the pump and other components in the hydraulic system from the larger pieces of contamination that will cause instant and catastrophic component failure.
MANUFACTURED BY
(0 reviews) -
Breathers & PlugsCSA – Air Filters
(3/4”, 1-1/4” BSPP Threaded, 3 & 6 Hole Flange)Air Filters
The CSA series air filters are mounted on oil tanks with the aim to filter the air.
They are formed by a spin-on replacement element that is screwed to a support which can the be welded or flanged to the oil tank.
MANUFACTURED BY
(0 reviews) -
Breathers & PlugsTRM Series
(1/8”, 1/4, 1/2, 3/4″, 1” BSPP Threaded)Reservoir Filler Breather Caps
Compact elements that can be easily mounted by screwing them into a suitable BSP thread. They permit the exchange of filtered air between the oil tank and the outside ambience. They are chrome plated with a male thread.
MANUFACTURED BY
(0 reviews) -
Breathers & PlugsTMA Series
(1/4″, 3/8″, 1/2″, 3/4″, 1″ BSPP Threaded)Aluminium Drain Plug with Magnet
TMA series aluminium drain plugs are manufactured from 11S Aluminium, complete with asbestos free flat seal.
The plug has a pressed-in cylindrical magnet.
Manufactured By
(0 reviews) -
AccumulatorsMBSP Diaphragm Accumulator
(1/2”, 3/4” BSPP Threaded)Energy Accumulators/Pulsation Dampers
- Electron-beam welded Hydraulic Accumulators
- Large volume and performance range (0.07 to 3.5 litres)
- Pressure range up to 350 bar (high bursting strength)
Manufactured By
(0 reviews)