Aluminium Gear Motors
Showing 1–9 of 33 results
-
Seal Kits (24)
-
Aluminium Gear Motors1SMA – Aluminium Gear Motors (Group 1 – DIN)
Reversible Gear Motors
Reversible motors have a 1/4” BSPP case drain port. This allows 2 or more motors to be connected in series. It is not possible to plug case drain even if you use the motor in one direction. Maximum back pressure on case drain is 30 bar.
- Group: 1
- Mount: DIN
- Min. – Max Displacement (CC / Rev): 2.5-4.2
- Max Cont. Pressure (BAR- PSI): 180
- Max Speed (RPM): 4000
Manufactured by
(0 reviews) -
Aluminium Gear MotorsALM1A – Aluminium Gear Motors (Group 1 – DIN)
Gear Motors
For medium to high pressure rates the ALM series is ideal for mobile and industrial sectors. Mono directional and bi directional with internal and external drain available.
- Group: 1
- Mount: DIN Group 1
- Min. Displacement (CC / Rev): 2.5
- Max. Displacement (CC / Rev): 4.2
- Max Cont. Pressure (Bar-PSI): 180
Manufactured By
(0 reviews) -
Aluminium Gear Motors15ME – Aluminium Gear Motors (Group 1 – SAE AA 2 Bolt)
Gear Motor
Made with aluminium alloy body and cast iron flanges and rear covers.
- Group: 1.5
- Mount: DIN Group 1, SAE AA – 2 Bolt
- Min Displacement: 2.8
- Max Displacement: 11
- Max Cont. Pressure (bar – psi): 250
- Max Speed (rpm): 4500
Manufactured By
(0 reviews) -
Aluminium Gear MotorsALM2AEO – Aluminium Gear Motor (Group 2 – SAE A 2 Bolt)
Aluminium Gear Motor
For medium to high pressure rates the ALM series is ideal for mobile and industrial sectors.
- Group: 2
- Mount: SAE A – 2 Bolt
- Min. – Max Displacement (CC / Rev): 4.5 – 28.2
- Max Cont. Pressure (BAR- PSI): 250
- Max Speed (RPM): 4000
Manufactured By
(0 reviews) -
Aluminium Gear Motors2SMG – Aluminium Gear Motors (Group 2 – DIN, SAE A 2 Bolt)
Reversible Gear Motors
Walvoil Fan Drive is a new range of vehicle cooling systems based on external gear motors.These types of motors are widely used in modern Hydraulics due to their performance, long life service and low maintenance costs.
- Group: 2
- Mount: DIN Group 2, SAE A – 2 Bolt
- Displacement Range [cc/rev]: 4-26
- Max. Cont. Pressure (Bar – PSI): 230
- Max Speed (RPM): 4000
Manufactured by
(0 reviews) -
Aluminium Gear Motors2ME – Aluminium Gear Motors (Group 2 – DIN, SAE A 2 Bolt)
Gear Motor
Made with aluminium alloy body and cast iron flanges and rear covers. High volumetric efficiency achieved by floating bushings and axial compensation. Integral gear with 12 teeth. Available with flanges, shafts and ports for the main European, German and American standards.
- Group: 2
- Mount: DIN, SAE A 2-Bolt
- Displacement Range [cc/rev]: 4.5-26
- Max. Cont. Pressure [bar-psi]: 250
- Max Speed [RPM]: 4000
Manufactured By
(0 reviews) -
Aluminium Gear Motors
25ME – Reversible Motors (Group 2.5 – DIN, SAE A 2 Bolt, SAE B 2 Bolt)
Reversible Motor
DIN Group 3 – 4 Bolt Mount – 1:8 Taper Shaft – Cast Iron End Covers – 9/16″ UNO Drain Port
- Group: 2.5
- Mount: DIN Group 3, SAE A – 2 Bolt, SAE B – 2 Bolt
- Displacement Range [CC / Rev]: 16 – 44
- Max Cont. Pressure: 250
- Max Speed (RPM): 3000
Manufactured By
(0 reviews) -
Aluminium Gear Motors3SMG – Aluminium Gear Motors (Group 3 – DIN)
Reversible Gear Motors
Unidirectional and reversible motors built in three pieces with aluminum body and cast iron flanges. Wide range of shafts and flanges. Configurations with integrated valves are available.
- Group: 3
- Mount: DIN
- Displacement Range [cc/rev]: 29-62
- Max. Cont. Pressure [bar-psi]: 190
- Max Speed [rpm]: 3300
Manufactured By
(0 reviews) -
Aluminium Gear Motors3ME – Aluminium Gear Motors (Group 3 – DIN, SAE B 2 Bolt)
Aluminium Gear Motors
Gear motors made with aluminium alloy body, cast iron flanges and covers. High volumetric efficiency achieved by floating bushings and axial compensation. Integral gear with 12 teeth. Double shaft seal.
- Group: 3
- Mount: DIN. SAE B – 2 Bolt
- Displacement [cc/rev]: 27 – 75
- Max. Cont. Pressure [bar-[psi]: 250
- Max Speed [RPM]: 3000
Manufactured By
(0 reviews)