MANP4 – Dual Axis Finger Tip Joystick

Contactless Two-Axis Joystick


  • Breakout force: 1 N
  • Operating force: 2 N (full deflection)
  • Maximum allowable: 300 N
  • Square gate
  • Mechanical operating angle: ±14°flat (±20° diagonal)
  • Weight: 120g
Manufactured By
In Stock

Specifications


Electrical Features:
  • Dual independent outputs, with same phase
  • Supply voltage (Vs): 5Vdc ±0.5Vdc regulated transient free
  • Output impedance: 100 Ohm each axis
  • Centre tap voltage (No load): 50%Vs ±1%
  • Center tap impedance: 1.1 kOhm
  • Return to centre voltage (No load):
    • Within ±60mV of Vs/2 @ 20°C (±73mV over full temperature range)
  • Output voltage span: ±25.0% to ±30.6% with respect to Vs/2
  • EMC immunity level:
    • 60V/m, 25MHz to 1GHz, 1KHz 80% sine wave modulation,
      EN50082-2 (Sept 1995)
  • EMC emissions level:
    • Complies with EN50081-1 (1992), 30MHz – 1GHz
  • ESD immunity level:
    • EN50082-2 (1995) ±8kV Contact discharge; ±15kV Air discharge
      (10 discharges)

Physical Features:
  • Breakout force: 1 N
  • Operating force: 2 N (full deflection)
  • Maximum allowable: 300 N
  • Square gate
  • Mechanical operating angle: ±14°flat (±20° diagonal)
  • Weight: 120g
  • Expected life: 15 x 10 cycles
  • Operating temperature range: -25 °C ÷ +70 °C
  • Storage temperature range: -40 °C ÷ +70 °C
  • Environmental rating: IP65 BS EN 60529
  • Connector: 8 Pin Berg Minitek 90309-008 Shrouded IDC Header
  • Mating connector: 8 Pin Berg Minitek 89361-708 IDC Connector

Order Codes:

A1000380600 (without cable)
A1000380602 (with 50 cm flat cable)

Downloads


MANP4 –  Technical Data Sheet
MANP4 –  Enquiry Form
MANP4 – Price List